Millermatic® 210


Welds material from 22 gauge to 3/8 in thick in a single pass. Perfect for light fabrication, garage/body shops, and farms and ranches.

General Information: 
  • Seven taps provide wider welding range of 30-210 amps with superior performance thoughout its operating range.
  • Industrial, dual-gear-driven, aluminum drive system features no-tool, quick-change reversible drive rolls and easy-to-set, scaled tension knob.
  • Convenient built-in dual gun/cable holder and consumable compartment.
  • Add the optional SpoolmateT 3035 spool gun for aluminum welding. Easy to install with new, direct hook up. And with Miller's exclusive Gun-On-DemandT,simply pull the trigger for either gun and your ready to weld. No wasted time installing modules and using toggle switches.
  • Easy-to-use operator interface and attached parameter chart makes it simple to set weld parameters.
  • M-25 MIG gun features durable one-piece handle, unicable outer jacket, trigger rated for one million cycles, and steel spring coils protecting cable ends.
Standard Accessories: 
  • Power Source
  • Weldcraft WP1712SFD150 TIG torch, 150 Amp with quick-connect and 12-1/2 ft cable
  • 12 ft (3.7m), 250 amp M-25 MIG gun
  • Work cable and clamp
  • Factory-installed dual gas solenoids
  • Argon mix regulator/flow gauge w/hose
  • Industrial power cord and plug
  • Factory-installed running gear/cylinder rack
  • 030/.035 in reversible dual groove drive rolls
  • Extra contact tips
  • Set-up and operation


  • Requires 1-Phase Power
  • Rated Output

  • 160 Amps at 24.5 VDC, 60% duty cycle
  • Welding Amperage Range

  • 30 - 210 Amps
  • Wire Speed

  • 35 - 700 IPM (0.9 - 17.8 m/min)
  • Net Weight

  • 200 lb (91 kg)